| Specification |
|---|
| Manufacturer | Penn Engineering |
| Manufacturer's Part Number | TS4-10-025 |
| Product Type | TS4 |
| Material Specification | Heat-treated 400 Series Stainless Steel |
| Finish Specification | Passivated and/or tested per ASTM A380 |
| For Use In Sheet Hardness | HRB 89 or less (Hardness Rockwell “B” scale) HB 187 or less (Hardness Brinell) |
| Fastener Material | Heat-treated 400 Series Stainless Steel |
| A | 0.406 mm ± 0.025 (0.016 in ±.001) |
| H | 2 mm /.079 in |
| L | 0.64 mm± 0.1 / 0.025 in ±.004 |
| P | 1.3 mm ± 0.05 / 0.051 in ±.002 |
| T | 0.25 mm ± 0.10 / 0.010 in ±.004 |
| Min. Dist. Hole C/L to Edge | 1 mm.039 in |
| Special Note 1 | Minimum sheet to prevent protrusion from through hole or minimum blind hole depth. |
| Special Note 2 | (blank) |
