| Specifications |
|---|
| Thread Size | 1/4-28 |
| Coating | Dry Film Lubricant |
| Wire Insert Series | Non-Locking |
| Wire Insert Type | Tangless |
| Material | Stainless Steel |
| Material | 304 Stainless Steel |
| Length Nominal Dia. | 1 Dia. |
| Material Specification | AS7245 |
| Number of Free Coils | 5 |
| Free Coil Diameter Min. | .236 in |
| Free Coil Diameter Max. | .256 in |
| Finish Specification | AS5272 (Type I) |
| Finish Appearance | Dark Gray to Black |
| Additional Information | Heli-Coil Tangless® Inserts eliminate tang break-off and retrieval and are easily adjusted or re moved after installation.
- BI-DIRECTIONAL DESIGN
Installs quickly and easily from either end.
- STRONGER ASSEMBLIES
Tapped threads are strength - ened because the inherent flexibility of the insert provides a more balanced distribution of static and dynamic loads throughout the engagement length.
- ELIMINATE STRESS.
Virtually no stress is induced into the parent material as no staking, swaging or keying in place is required.
- POSITIVE SELF-LOCKING TORQUE.
Heli-Coil Tangless® screw-lock inserts provide a positive, self-locking torque complying with the require ments of NASM8846.
- MINIMIZE SPACE AND WEIGHT.
Requires smaller boss than solid inserts; minimize total in-place cost.
- CONFORM TO NAS1130
|
| |
| Drilling Data |
|---|
| Suggested Drill Size ~ Aluminum | G (.2610) |
| Suggested Drill Size ~ Steel, Magnesium, Plastic | 6.7 mm (.2638) |
| Minimum Drilling Depth for Bottoming Taps | .393 in |
| Minimum Drilling Depth for Plug Taps | .589 in |
| |
| Tapping Data |
|---|
| Countersink Diameter Min. | .290 in |
| Countersink Diameter Max. | .320 in |
| Pitch Diameter Min. | .273 in |
| Pitch Diameter Max. ~ Class of Fit 3B_in | .275 in |
| Pitch Diameter Max. ~ Class of Fit 2B_in | .276 in |
| Minimum Tapping Depth | .290 in |
| Tap Major Diameter Max. | .300 in |
| |
| Taps & Gages |
|---|
| Tap High Spiral Flute Bottoming 2B | 6906-4 |
| Tap High Spiral Flute Bottoming 3B | 5906-4 |
| Tap Spiral Point Plug 2B | 4FSA |
| Tap Spiral Point Plug 3B | 4FSB |
| Tap Straight Flute Bottoming 2B | 4FBA |
| Tap Straight Flute Bottoming 3B | 4FBB |
| Tap Straight Flute Plug 2B | 4FPA |
| Tap Straight Flute Plug 3B | 4FPB |
| Working Gage 2B | 3694-4 |
| Working Gage 3B | 1443-4 |