• Home
  • T1185-4C375 Tangless Non-Locking Insert

T1185-4C375 Tangless Non-Locking Insert

SKU: 00089 | MPN: T1185-4C375
/ Eaches
Subtotal:$0.45
WARNING: Cancer and Reproductive Harm --
P65Warnings.ca.gov
Discount by: unit
QuantityPrice
1 - 249
250 - 499
500 - 999
1,000 - 2,999
3,000 - 4,999
5,000 - 9,999
10,000 - 24,999
25,000 - 49,999
50,000 +
*Additional inventory may be available. Please contact your sales location.

Details

Specifications
Thread Size1/4-20
CoatingNo Finish
Wire Insert SeriesNon-Locking
Wire Insert TypeTangless
MaterialStainless Steel
Material304 Stainless Steel
Length Nominal Dia.1-1/2 Dia.
Material SpecificationAS7245
Number of Free Coils5-3/4
Free Coil Diameter Min..310 in
Free Coil Diameter Max..330 in
Finish Specificationn/a
Additional InformationHeli-Coil Tangless® Inserts eliminate tang break-off and retrieval and are easily adjusted or re moved after installation.

  • BI-DIRECTIONAL DESIGN
    Installs quickly and easily from either end.


  • STRONGER ASSEMBLIES
    Tapped threads are strength - ened because the inherent flexibility of the insert provides a more balanced distribution of static and dynamic loads throughout the engagement length.


  • ELIMINATE STRESS.
    Virtually no stress is induced into the parent material as no staking, swaging or keying in place is required.


  • POSITIVE SELF-LOCKING TORQUE.
    Heli-Coil Tangless® screw-lock inserts provide a positive, self-locking torque complying with the require ments of NASM8846.


  • MINIMIZE SPACE AND WEIGHT.
    Requires smaller boss than solid inserts; minimize total in-place cost.


  • CONFORM TO NAS1130
 
Drilling Data
Suggested Drill Size ~ AluminumH (.2660)
Suggested Drill Size ~ Steel, Magnesium, PlasticH (.2660)
Minimum Drilling Depth for Bottoming Taps.575 in
Minimum Drilling Depth for Plug Taps.800 in
 
Tapping Data
Countersink Diameter Min..310 in
Countersink Diameter Max..340 in
Pitch Diameter Min..282 in
Pitch Diameter Max. ~ Class of Fit 3B_in.285 in
Pitch Diameter Max. ~ Class of Fit 2B_in.286 in
Minimum Tapping Depth.430 in
Tap Major Diameter Max..319 in
 
Taps & Gages
Tap High Spiral Flute Bottoming 2B6905-4
Tap High Spiral Flute Bottoming 3B5905-4
Tap Spiral Point Plug 2B4CSA
Tap Spiral Point Plug 3B4CSB
Tap Straight Flute Bottoming 2B4CBA
Tap Straight Flute Bottoming 3B4CBB
Tap Straight Flute Plug 2B4CPA
Tap Straight Flute Plug 3B4CPB
Working Gage 2B3688-4
Working Gage 3B1442-4
 
Reference
Aerospace Standard Part NumberNAS1130-4-15