| Specifications |
|---|
| Thread Size | M3X0.5 |
| Coating | No Finish |
| Wire Insert Series | Non-Locking |
| Wire Insert Type | Tangless |
| Material | Nitronic |
| Material | Nitronic 60 |
| Length Nominal Dia. | 1-1/2 Dia. |
| Material Specification | Alloy number UNS S21800 |
| Number of Free Coils | 6-3/8 |
| Free Coil Diameter Min. | 3.8 mm |
| Free Coil Diameter Max. | 4.35 mm |
| Finish Specification | n/a |
| Additional Information | Heli-Coil Tangless® Inserts eliminate tang break-off and retrieval and are easily adjusted or re moved after installation.
- BI-DIRECTIONAL DESIGN
Installs quickly and easily from either end.
- STRONGER ASSEMBLIES
Tapped threads are strength - ened because the inherent flexibility of the insert provides a more balanced distribution of static and dynamic loads throughout the engagement length.
- ELIMINATE STRESS.
Virtually no stress is induced into the parent material as no staking, swaging or keying in place is required.
- POSITIVE SELF-LOCKING TORQUE.
Heli-Coil Tangless® screw-lock inserts provide a positive, self-locking torque complying with the require ments of NASM8846.
- MINIMIZE SPACE AND WEIGHT.
Requires smaller boss than solid inserts; minimize total in-place cost.
- CONFORM TO NAS1130
|
| |
| Drilling Data |
|---|
| Suggested Drill Size ~ Aluminum | 3.15 mm |
| Suggested Drill Size ~ Steel, Magnesium, Plastic | 3.20 mm |
| Minimum Drilling Depth for Bottoming Taps | 6.50 mm |
| Minimum Drilling Depth for Plug Taps | 9.00 mm |
| |
| Tapping Data |
|---|
| Countersink Diameter Min. | 3.40 mm |
| Countersink Diameter Max. | 4.00 mm |
| Pitch Diameter Min. | 3.32 mm |
| Pitch Diameter Max. ~ Class of Fit 4H_mm | 3.37 mm |
| Pitch Diameter Max. ~ Class of Fit 5H_mm | 3.38 mm |
| Minimum Tapping Depth | 5.00 mm |
| Tap Major Diameter Max. | 3.72 mm |
| |
| Taps & Gages |
|---|
| Tap High Spiral Flute Bottoming 4H5H | 5081-3 |
| Tap High Spiral Flute Bottoming 5H | 4681-3 |
| Tap Spiral Point Plug 4H5H | 4863-3 |
| Tap Spiral Point Plug 5H | 4763-3 |
| Tap Straight Flute Bottoming 4H5H | 4693-3 |
| Tap Straight Flute Bottoming 5H | 2093-3 |
| Tap Straight Flute Plug 4H5H | 4687-3 |
| Tap Straight Flute Plug 5H | 2087-3 |
| Reference Gage 4H | 4624-3 |
| Reference Gage 5H | 1324-3 |