| Specifications |
|---|
| Manufacturer | Stanley Engineered Fastening |
| Manufacturer's Part No. | 70815-4-562 |
| Material | Brass |
| Thread Size | 1/4-20 |
| Diameter | 0.383 in |
| A - Diameter | 0.383 in ± 0.005 |
| B - Diameter | 0.323 in ± 0.005 |
| L - Length | 0.562 in |
| C - Hole Size | 1.32 in ± 0.001 |
| D - Hole Taper Diameter | 1.35 in ± 0.001 |
| Minimum Boss Diameter | 0.766 in |
| Minimum Hole Depth | 0.592 in |
| Hole Taper Angle | 8 degrees |
| Additional Information | Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations. |
| Features & Benefits | » Vertical flutes and horizontal fins provide superior assembly strength » Tapered design assures rapid and accurate alignment prior to installation » Flute and fin design provide a chip-free environment |
| Product Line Description | A fluted brass insert designed for ultrasonic or heat installation into thermoplastics. |
| |
| Test Data |
|---|
| ABS Rotation_lb·in | 104 lb·in |
| ABS Tensile_lb | 1130 lb |
| Polycarbonate Rotation_lb·in | 202 lb·in |
| Polycarbonate Tensile_lb | 1820 lb |
| Nylon 6/6 Rotation_lb·in | 225 lb·in |
| Nylon 6/6 Tensile_lb | 1434 lb |
| Structural Foam Rotation_lb·in | 206 lb·in |
| Structural Foam Tensile_lb | 1802 lb |