| Specifications |
|---|
| Manufacturer | Stanley Engineered Fastening |
| Manufacturer's Part No. | 70815-06-312 |
| Material | Brass |
| Thread Size | #6-32 |
| Diameter | 0.219 in |
| A - Diameter | 0.219 in ± 0.005 |
| B - Diameter | 0.183 in ± 0.005 |
| L - Length | 0.312 in |
| C - Hole Size | 0.179 in ± 0.001 |
| D - Hole Taper Diameter | 0.198 in ± 0.001 |
| Minimum Boss Diameter | 0.438 in |
| Minimum Hole Depth | 0.342 in |
| Hole Taper Angle | 8 degrees |
| Additional Information | Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations. |
| Features & Benefits | » Vertical flutes and horizontal fins provide superior assembly strength » Tapered design assures rapid and accurate alignment prior to installation » Flute and fin design provide a chip-free environment |
| Product Line Description | A fluted brass insert designed for ultrasonic or heat installation into thermoplastics. |
| |
| Test Data |
|---|
| ABS Rotation_lb·in | 26 lb·in |
| ABS Tensile_lb | 309 lb |
| Polycarbonate Rotation_lb·in | 42 lb·in |
| Polycarbonate Tensile_lb | 453 lb |
| Nylon 6/6 Rotation_lb·in | 44 lb·in |
| Nylon 6/6 Tensile_lb | 416 lb |
| Structural Foam Rotation_lb·in | 44 lb·in |
| Structural Foam Tensile_lb | 441 lb |