| Specifications |
|---|
| Thread Size | M6x1 |
| Coating | No Finish |
| Wire Insert Series | Locking |
| Wire Insert Type | Tangless |
| Material | Stainless Steel |
| Material | 304 Stainless Steel |
| Length Nominal Dia. | 2 Dia. |
| Material Specification | AS7245 |
| Number of Free Coils | 9-1/2 |
| Free Coil Diameter Min. | 7.4 mm |
| Free Coil Diameter Max. | 7.95 mm |
| Additional Information | Heli-Coil Tangless® Inserts elimi nate tang break-off and retrieval and are easily adjusted or re moved after installation.
- BI-DIRECTIONAL DESIGN
Installs quickly and easily from either end.
- STRONGER ASSEMBLIES
Tapped threads are strength - ened because the inherent flexibility of the insert provides a more balanced distribution of static and dynamic loads throughout the engagement length.
- ELIMINATE STRESS.
Virtually no stress is induced into the parent material as no staking, swaging or keying in place is required.
- POSITIVE SELF-LOCKING TORQUE.
Heli-Coil Tangless® screw-lock inserts provide a positive, self-locking torque complying with the require ments of NASM8846.
- MINIMIZE SPACE AND WEIGHT.
Requires smaller boss than solid inserts; minimize total in-place cost.
- CONFORM TO NAS1130
|
| |
| Drilling Data |
|---|
| Suggested Drill Size ~ Aluminum | 6.25 mm |
| Suggested Drill Size ~ Steel, Magnesium, Plastic | 6.30 mm |
| Minimum Drilling Depth for Bottoming Taps | 16.00 mm |
| Minimum Drilling Depth for Plug Taps | 21.00 mm |
| |
| Tapping Data |
|---|
| Countersink Diameter Min. | 7.10 mm |
| Countersink Diameter Max. | 7.70 mm |
| Pitch Diameter Min. | 6.65 mm |
| Pitch Diameter Max. ~ Class of Fit 4H_mm | 6.72 mm |
| Pitch Diameter Max. ~ Class of Fit 5H_mm | 6.74 mm |
| Minimum Tapping Depth | 13.00 mm |
| Tap Major Diameter Max. | 7.42 mm |
| |
| Taps & Gages |
|---|
| Tap High Spiral Flute Bottoming 4H5H | 5081-6 |
| Tap High Spiral Flute Bottoming 5H | 4681-6 |
| Tap Spiral Point Plug 4H5H | 4863-6 |
| Tap Spiral Point Plug 5H | 4763-6 |
| Tap Straight Flute Bottoming 4H5H | 4693-6 |
| Tap Straight Flute Bottoming 5H | 2093-6 |
| Tap Straight Flute Plug 4H5H | 4687-6 |
| Tap Straight Flute Plug 5H | 2087-6 |
| Reference Gage 4H | 4624-6 |
| Reference Gage 5H | 1324-6 |
