| Specification |
|---|
| Manufacturer | Penn Engineering |
| Manufacturer's Part Number | PL-M5-ZC |
| Description | PL-M5-ZC Locking Thread Nut |
| Product Type | PL |
| Thread Size | M5X0.8 |
| Material Specification | Heat-Treated Carbon Steel |
| Finish Specification | Zinc plated per ASTM B633, SC1 (5µm), Type II, yellow |
| Shank Code | (blank) |
| A Shank Max. | 1.53 mm |
| Sheet Thickness | 1 to 1.78 mm |
| Min. Sheet Thickness | 1.00 mm* |
| For Use In Sheet Hardness | HRB 70 / HB 125 or Less |
| Thread Specification | Internal, ASME B1.13M, 6H |
| Material Finish | Zinc Plated 5µm, Yellow |
| C | 7.98 mm Max. |
| D | 7.52 mm Max. |
| T | 4.45 mm Max. |
| Hole Size in Sheet | 8 mm +0.08 |
| Min. Dist. Hole C/L to Edge | 6.35 mm |
| Special Note 1 | 1 - Can be used in panel thickness of .040” to .060” / 1 mm to 1.53 mm provided the fastener is not fully installed. The knurled collar must be left protruding above the sheet to the degree that the sheet thickness is less than .060” / 1.53 mm. - Knurled collar may fracture if fastener is used in sheets thicker than .070” / 1.78 mm and screw is tightened beyond maximum tightening torque. |
| Special Note 2 | 2 - HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell. |
